|
Ünlü Cellular Primer |
|
|
|
|
|
|
|
|
|
|
|
|
Ünlü Cellular Primer |
| Product Code | : | 612 SERIES | | Color/Apperarance | : | White, Oxide yelow, Oxide red, Gray, Black, Brown and any color desired can de done | | Description | : | It is a nitrocellulosic based air drying monocomponent pigmented primer. |
| Product Code | : | 612 SERIES | | Color/Apperarance | : | White, Oxide yelow, Oxide red, Gray, Black, Brown and any color desired can de done | | Description | : | It is a nitrocellulosic based air drying monocomponent pigmented primer. |
| Application Field | : | Ünlü Primer System is designed to fill and cover the pores of wooden surfaces.It has a high filling and hiding power with fast drying and easy sanding properties. |
| Density (20°C , gr/cm³ ) | : | 1,30-1,55 (depending on the color) | | Drying (20° C) | : | Dust Drying : 10-12min. | | | : | Touchin Drying : 20-25min. | | | : | Complate Drying : 1,5-2 hrs depending on the temperature and moisture | | Solid Contetnt % | : | 55-70(depending on the color) | | Thinner | : | 961-0631 Ünlü Cellulosic Super Thinner | | Dilution Ratio | : | 50-60% (depending on the color) | | Hardener | : | - | | Mixing Ratio (By Weight) | : | - | | Pot-Life (20° C) | : | - | | Coverage | : | 8-10 m² of area is coated by 1Lt. Product .(Excluding losses) |
| Application Method | : | It should be applied directly by spraying. Before application wooden surfaces should be sanded for proper appearance and cleaned from dust. Ünlü Cellulosic Primer which is prepared according to dilution ratios given above, is in two to five cross-wise layers leaving 20-30 minutes interval in between coats. 2-2,.5 hours the application of final coat, surface is sanded. Any of cellulosic, polyurethane, acid curing or polyester topcoat is suggested to be applied on the primed and sanded surface after one night . For further details please contact our technical staff. |
| Warning | : | Packages must be closed after use. .Since the system contains volatile and flammable solvents, ventillation should be applied in the workshop.Product should be kept away from flame and sources of ignition. |
|
|
|
Teknik Bülten
Print
Email
